Bimota Forum

hello owls how much are 2 cylinders + 2 pistons? thanks

2 bims which setting did you use for jollymoto carburetors? the setting that provides piero seems to be rich, I think we can do better

2 bis quale set hai per jolly moto ?

OK Thanks

But how can we know which position of the phonic wheel we have the ignition point

sorru for the bad english

Gilles

in the phonic wheel 2 teeth are missing, and that is the mome ...

to be able to modify it, new phonic wheels must be created to let the phase sensor read a different position .... unfortunately the pegaso ecu no longer has the software for editing

to be able to modify it, new phonic wheels must be created to let the phase sensor read a different position .... unfortunately the pegaso ecu no longer has the software for editing

Moreno,

No the engine does not turn from the starter button.
But also, even if i push start there is no spark.

give it a try, when you push the bike it removes the spark plugs from the eng ...

when you press the start button the electric motor turns ?? but after 1 or 2 laps does it stop?

I explored very well everything we need to know about starting up bimota, because even I had a little problem .... could you describe your problem well ?? what happens when you press the start button? ...

Ottimo prezzo per una moto con 96 km

what was the cause of the break? it would be useful to understand the problem to prevent it from happening again .... the original pistons you will not find them anymore .... but I drive fiedler that ...

nice job gavin !! I follow all the updates with interest Has the engine been purchased recently in Italy? is the same for sale on ebay for € 6500 ??

what are the mufflers? who produces them?

http://i63.tinypic.com/9h0rnn.jpg

What battery do you have ?
When I put a small Lithium ion on mine would do something similar .

Battery new Ytx12 bs 10ah

my sprag clutch has already been replaced with the new piero mod ...

when the bike is cold in the morning how do you start it well ?? I pull the choke lever, press the start button .... the starter motor responds and brings the pistons into compression, but then at the ...