Anders
Joined: 05 May 2009 Posts: 121 Location: Norway
|
Posted: Tue May 05, 2009 8:58 pm Post subject: bb1 Supermono pegs/levers/hangers |
|
|
After crashing my bb1 at a trackday in the autumn of 2007, I decided I had to make a set of rearsets to replace the bent and grinded ones.
They are similar to the originals as far as dimensions goes, but the levers look somewhat different. The levers have decent bushes, so I hope they will develop less slop than the originals. I have not bothered to use Silentblocks, so vibrations thru the pegs will increase somewhat. The parts are interchangeable with the originals, my hangers can be used with original pegs, my levers can be used with original hanges and pegs etc.
They are made by water jet cutting and some milling. Not to the highest polished standard, but useable as track day replacements to save those unobtainable original parts. However, if you like to, they can of course be polished by yourself.
Please have a look at http://www.kvenna.net/Fotpinner.html
That site is in Norwegian, but I hope the images are international.
Everything is made out of 6082 T6.
If you need a set, please shoot me a mail. I have a few cut parts in stock, but have to do the milling and turning necessary to finish them, so delivery time will depend on my available spare time and your impatience
More images are available on request. _________________ Anders
bb1, Mille S2, Guzzi / Watsonian, Morini Corsaro 125, EC200, RD350YPVS etc |
|