Bimota Forum Forum Index Bimota Forum
Forum for Bimota Owners and Riders
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in  

Photo of front sprocket spline or shaft with measurements

 
Post new topic   Reply to topic    Bimota Forum Forum Index -> V Due
View previous topic :: View next topic  
Author Message
rudadue



Joined: 24 Apr 2015
Posts: 17

PostPosted: Thu Jun 04, 2015 5:33 pm    Post subject: Photo of front sprocket spline or shaft with measurements Reply with quote

Right Bimo's here' the deal can any one post a photo of v-due front sprocket spline in life size or with measurements so as to see compatibility with something else yes yes it's v-due only, but you never know any way thank you to who ever it is posts photo graph for us to investigate properly with a picky to work from regards to all bill
Back to top
View user's profile Send private message
trev45



Joined: 15 Jun 2011
Posts: 449
Location: Sydney Australia

PostPosted: Fri Jun 05, 2015 12:28 am    Post subject: Reply with quote

I can do if you like pm me a email address and I can send photos

But you can buy them cheap ?

Trev
Back to top
View user's profile Send private message
rudadue



Joined: 24 Apr 2015
Posts: 17

PostPosted: Mon Jun 08, 2015 8:10 pm    Post subject: Reply with quote

Hi to you all big up to trev45 , it appears 14 splines 22inner 25 mm outer spline heights now ducati has 14 splines 22.5mm 25mm only the offset of the sprocket teeth in relation to the offset After searching aprilia svx sprocket has the same 14splines 22.5mm inner and 25mm outer spline heights, width of the sprocket is 10.9mm, Gas Gas ec300 ,250,200,hp 450 ,pampers 450 width is 12 mm in total so with a bit of packing ie washer on spline bush to get alignment just an idea certain ducati's have 16.5 mm width any way regards bill
Back to top
View user's profile Send private message
SethG



Joined: 09 Aug 2014
Posts: 95

PostPosted: Sat Jun 13, 2015 4:13 pm    Post subject: Reply with quote

Back to top
View user's profile Send private message
Bud977



Joined: 03 Mar 2013
Posts: 525
Location: Sydney

PostPosted: Sun Jun 14, 2015 1:14 am    Post subject: Reply with quote

This is a Ducati 748 sprocket:

Back to top
View user's profile Send private message
Bud977



Joined: 03 Mar 2013
Posts: 525
Location: Sydney

PostPosted: Sun Jun 14, 2015 1:17 am    Post subject: Reply with quote

Aprilia SVX550:

Back to top
View user's profile Send private message
rudadue



Joined: 24 Apr 2015
Posts: 17

PostPosted: Sun Jun 14, 2015 10:49 am    Post subject: Reply with quote

Hi all
Nice one bud ,what would be good if someone can varify ducati aprilia sprocket fits on spline , then it's a case of skimming/shimming to correct alignment i would of thought 0.2mm would not too much play as it is only the spline height . Then finding rethal one as that would lighter than std

Enjoy the rest of the w/end
Regards bill
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Bimota Forum Forum Index -> V Due All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

The Bimota Forum has no official connection to Bimota S.p.A.. We just ride or are interested in their motorcycles and support the brand. All trademarks are acknowledged