Bimota Forum

[BimotaBoy]

Ok, the rear brake caliper apparently on the YB10 is a P32B.

Does anyone know what the ones on an SB6, SB8RS or TESI 1D are ??.

Because when you look at them apart from the colour they all look the same and I bet the piston size is the same

[2bims]

If its the same as the link below...then yeh....same rear caliper that Bimota used on DB2, Db4, Vdue, YB11, SB6, SB8 and tesi...and others...what are you after?

http://www.oppracing.com/product_display/30864-brembo-oe-brake-caliper-p32b-gold-w-07bb0110/

http://www.ebay.co.uk/itm/BREMBO-Brake-Caliper-Brembo-P32B-gold-rear-502777-/282133609532?_trksid=p2141725.m3641.l6368

Used by Moto Guzzi and Cagiva Mito bikes also

[BimotaBoy]

I am looking for some caliper dust seals.

Apparently you can't get them for the P32B, so if they are the same caliper on all the other bikes then that means that you can't get them for any of those, but I find it hard to believe that you can't

[2bims]

There was an issue with liability some years ago with Brembo...whereby they stopped selling parts as some folk may for them incorrectly...and they didnt want to be liable for accidents....
Try contacting this company as they seem to have a lot of spares for brembo..

http://www.ebay.co.uk/sch/m.html?_odkw=brembo&_ssn=powerhouse-uk&item=151129601261&_osacat=0&_from=R40&_trksid=p2046732.m570.l1313.TR0.TRC0.H0.Xbrembo+moto+guzzi.TRS0&_nkw=brembo+moto+guzzi&_sacat=0

[BimotaBoy]

Thanks for the link. Ordered and fitted. Also ordered a rear hugger and next on the list is a set of replacement mirrors as mine just flap about in the breeze. Still looking for the reserve switch.