View previous topic :: View next topic |
Author |
Message |
2bims
Joined: 03 Apr 2010 Posts: 7289
|
Posted: Sat Feb 17, 2018 11:15 am Post subject: |
|
|
That Carbon rear brake master cover looks like one that the Forum had made up as a batch....with a Bimota "b" logo inset into the front face.....I had an "original" bashed up version that was an option for Bimotas that was used to make up a load and a fresh batch.....they also fitted Db2, Db4, Vdue, and many other YB series and SB from recollection........was around 5 years ago when they were made up |
|
Back to top |
|
|
eLo
Joined: 23 Aug 2016 Posts: 16 Location: Norway
|
Posted: Mon Feb 19, 2018 6:49 pm Post subject: |
|
|
2bims - Do you have any idea if there might be some available somewhere? I also have a DB2 and a DB4 so I would like to hold of at least three. |
|
Back to top |
|
|
2bims
Joined: 03 Apr 2010 Posts: 7289
|
Posted: Mon Feb 19, 2018 7:44 pm Post subject: |
|
|
I'll dig out who first made them for the Forum and see if he has any left or can make more........As yup....they fit DB2 and Db4 also,,,,The Db4 does have an ally plate there as standard....the carbon covers also fit onto the Vdue range.... |
|
Back to top |
|
|
2bims
Joined: 03 Apr 2010 Posts: 7289
|
Posted: Mon Feb 19, 2018 7:52 pm Post subject: |
|
|
It was "morepower" that made the carbon heel guards....but it was way back in November 2012...so over 5 years ago....go to memberlist at top of forum and put mebers in alphabetical order and go through the pages...and you'll find his Forum name of "morepower" and from there you can Private Message him to see if he has more or can make more....Best I can offer i'm afraid......I have a mould for them, but cant offer service to make carbon copies for you... |
|
Back to top |
|
|
eLo
Joined: 23 Aug 2016 Posts: 16 Location: Norway
|
Posted: Mon Feb 19, 2018 11:27 pm Post subject: |
|
|
Sounds like a good start - thanks! |
|
Back to top |
|
|
|