View previous topic :: View next topic |
Author |
Message |
Alan simons
Joined: 21 Nov 2016 Posts: 16 Location: Tyne wear uk
|
Posted: Sat Feb 02, 2019 3:16 pm Post subject: Sb6 air box |
|
|
Thanks for info on removing seat unit , found air box loose agains carbs not sure if there should be claps from air box to carbs if so where can I get thanks _________________ Yb9 , db4 , SB6 , SB6r , BMWrt 1200 |
|
Back to top |
|
|
rpo83
Joined: 28 Oct 2008 Posts: 387 Location: Melbourne, Australia
|
Posted: Sun Feb 03, 2019 12:05 am Post subject: |
|
|
Hi Alan, there should be clamps, i'd assume they would be standard Suzuki clamps. _________________ Cheers
Steve
YB5 #130, YB5 #196, YB7 #302, SB6 #949, Laverda RGS Executive, Laverda RGS Corsa. |
|
Back to top |
|
|
Evilchicken0
Joined: 12 May 2010 Posts: 2996 Location: London
|
Posted: Mon Feb 04, 2019 2:48 pm Post subject: |
|
|
The airbox should have rubbers to attach it to the carbs then you can use Suzuki clips.
My airbox has been moded with the standard 1100 trumpets. The central ones are trimmed at the top to fit the box, they're attached to the carbs and the box is just pushed on after.
You can trim a flat panel KnN to fit into the airbox and junk the mesh on the left side. Mine is also cut out on the right. _________________ Don't read everything you believe |
|
Back to top |
|
|
|