View previous topic :: View next topic |
Author |
Message |
who
Joined: 10 Nov 2010 Posts: 402 Location: Melbourne Australia
|
Posted: Wed May 18, 2011 1:52 am Post subject: DB2 triple clamp dimensions help? |
|
|
Hi Guys,
Any one able to go out to the shed and measure the fork pitch and offset of the triple clamps on your DB2.
If they are right I can get a set and bore them to 43mm for one of my YB racebikes.
Thanks in anticipation |
|
Back to top |
|
|
redtop
Joined: 04 Mar 2011 Posts: 13 Location: Stockholm, Sweden
|
Posted: Thu May 19, 2011 7:04 am Post subject: |
|
|
I remember the offset to be 30mm, but I'll have to double check.
I don't understand fork pitch. Is it the c-c distance between the legs? _________________ RedTop
DB2 #300 |
|
Back to top |
|
|
who
Joined: 10 Nov 2010 Posts: 402 Location: Melbourne Australia
|
Posted: Thu May 19, 2011 7:12 am Post subject: |
|
|
30mm is good, and the same as the YB6... Yes I'm talking about c-c distance between the fork legs, in my own language evidently!
Thanks for your help so far Red! |
|
Back to top |
|
|
redtop
Joined: 04 Mar 2011 Posts: 13 Location: Stockholm, Sweden
|
Posted: Fri May 20, 2011 6:49 am Post subject: |
|
|
Good that i double checked!
Offset is 35mm and the c-c distance is 190mm. _________________ RedTop
DB2 #300 |
|
Back to top |
|
|
who
Joined: 10 Nov 2010 Posts: 402 Location: Melbourne Australia
|
Posted: Fri May 20, 2011 8:01 am Post subject: |
|
|
Thanks again Red. c-c distance is fine, but offset it getting out to the slow (steering) side at 35mm.
Thanks for looking at it for me |
|
Back to top |
|
|
|