Bimota Forum

[SiBag]

OK all,
On a bit of a tidy up on the SB6
Brake reservoir hoses and clips are all looking a bit old and tired. So want to replace them.
On my harris I have used stainless braided hose and anodized hose end finishers, but on the SB6 the hose length is only short. So not enough room for the end finishers etc. If I just use stainless braided hose it will fray like hell and look a bit pants.

So what hose and hose clips do you all use. And where are you getting them, had a quick scoot on tinternet and can only find jubalee type clips.

Cheers in advance.
_________________
Si...
SB6..CCM R30...GSXR-750-M...RGV-250-VJ22.. GSX-1100-EFE Project....Harris Magnum II project...

If its got Ti#s or Wheels its gona give you trouble

[Evilchicken0]

You can get a Brembo kit, it's a length of hose and comes with two spring clips ... Like this

http://www.motopike.com/index.php?route=product/category&path=39
_________________
Don't read everything you believe

[SiBag]

I take it no one knowswhere I can get stainless versions of the Brembo clips.
Zink plated or Black dont exactly get me hot.

Thanks for the info..
_________________
Si...
SB6..CCM R30...GSXR-750-M...RGV-250-VJ22.. GSX-1100-EFE Project....Harris Magnum II project...

If its got Ti#s or Wheels its gona give you trouble

[oily]

Unfortunately, stainless isn't as springy as some other metals.
Use black, blends in better
_________________
SB6 mk1 (project mega light, big bore)
Sb6 mk2 ( Big Bore)
Sb6 mk2 ( Restored)
Sb6R fighter
Sb6 or Sb7 WANTED

[Evilchicken0]

You don't see them, one is under the res anyway. Calm yourself with knowing these are lighter
_________________
Don't read everything you believe