|
Bimota Forum Forum for Bimota Owners and Riders
|
View previous topic :: View next topic |
Author |
Message |
TVRRICH
Joined: 05 Feb 2016 Posts: 211 Location: Coventry UK
|
Posted: Mon Jul 13, 2020 12:12 pm Post subject: |
|
|
Nice one Welsh lamb, thanks for organising this |
|
Back to top |
|
|
welshlamb
Joined: 09 Mar 2011 Posts: 592 Location: South Wales , Nr. Abergavenny
|
Posted: Fri Jul 31, 2020 6:22 pm Post subject: |
|
|
Will pick up from machine shop on Monday and send to coaters for cerakoting. Should have back within a week . Thanks for your patience. _________________ Not as many bikes as I would like and already too many to keep up with! |
|
Back to top |
|
|
welshlamb
Joined: 09 Mar 2011 Posts: 592 Location: South Wales , Nr. Abergavenny
|
Posted: Fri Jul 31, 2020 6:29 pm Post subject: |
|
|
Will pick up from machine shop on Monday and send to coaters for cerakoting. Should have back within a week . Thanks for your patience. _________________ Not as many bikes as I would like and already too many to keep up with! |
|
Back to top |
|
|
TVRRICH
Joined: 05 Feb 2016 Posts: 211 Location: Coventry UK
|
Posted: Fri Jul 31, 2020 8:06 pm Post subject: |
|
|
Nice one Ralph |
|
Back to top |
|
|
hindsight
Joined: 13 Feb 2010 Posts: 126 Location: Central Scotland
|
Posted: Fri Jul 31, 2020 8:19 pm Post subject: |
|
|
Hi Ralph - out of sheer laziness on my part did you also figure out a supplier for the the grommets protecting the fairing where the bolts fit?
I've just measured it to be about 15mm ID, 20mm OD and 2.5mm groove width, and will go looking for a supplier in due course, but I suspect you may have already done so!
Thanks,
Mike |
|
Back to top |
|
|
2bims
Joined: 03 Apr 2010 Posts: 7289
|
Posted: Sat Aug 01, 2020 5:54 am Post subject: |
|
|
Hi Hindsight......I go to Halfords and buy "electrical" rubber grommets......get yourself a tray full of them for different sizes......or just buy online what you need....thats all they are |
|
Back to top |
|
|
hindsight
Joined: 13 Feb 2010 Posts: 126 Location: Central Scotland
|
Posted: Sat Aug 01, 2020 9:31 am Post subject: |
|
|
2bims wrote: |
Hi Hindsight......I go to Halfords and buy "electrical" rubber grommets......get yourself a tray full of them for different sizes......or just buy online what you need....thats all they are |
Yeah - I thought about that Steve, and already have some in the workshop, but every one I already have is a smaller groove width (1.6mm, rather than 2.5mm), and Halfords tend not to have many variants on the size.
I'll have a rummage around the interweb and ebay to see what I can find. |
|
Back to top |
|
|
welshlamb
Joined: 09 Mar 2011 Posts: 592 Location: South Wales , Nr. Abergavenny
|
Posted: Wed Aug 05, 2020 12:36 pm Post subject: |
|
|
Shiny parts deserve big pictures!!.....so.....
A day later than I mentioned but the seat screws were picked up yesterday. All dims seem to check out so it's off to the coaters next. Unfortunately due to a family death thee are closed for a few days until mid next week.
Patience is a virtue as they say.
The engineering shop is just 2 (3?) guys with a great assortment of some vintage machine tools and some 'newer' CNC machines. They were quite interested in the application and for once the "no job too small" bullshit you get from many businesses (until they say "No thanks" ) seems to be true.
The guy running it fled a bigger family engineering business and seems happy to be 'in control' of his microbusiness.
As its 6 miles from my house he may well be a source for other unobtanium or custom parts? _________________ Not as many bikes as I would like and already too many to keep up with! |
|
Back to top |
|
|
TVRRICH
Joined: 05 Feb 2016 Posts: 211 Location: Coventry UK
|
Posted: Wed Aug 05, 2020 3:09 pm Post subject: |
|
|
They look great Welsh lamb, looking forward to the finished item |
|
Back to top |
|
|
2bims
Joined: 03 Apr 2010 Posts: 7289
|
Posted: Wed Aug 05, 2020 4:16 pm Post subject: |
|
|
Lovlely WelshLamb......Torn now though....decisions decisions....do I hold back from the black anodising and stay shiney?.....Love my Shiney...and its not like my bike is stock...far from it.....hhmmmmmmmmmm.......Shiney...no....Black...no....no......,,,,,Or shite...just flipping a coin.....shite.....came up tails for Black.....Best of 3....shite.....came up tails again......Best of five.....shite...tails friggin again.....its jinxed......me flipping the coin 3 times means I must want SHINEY none anodised please.......Decision made...FInal.... |
|
Back to top |
|
|
welshlamb
Joined: 09 Mar 2011 Posts: 592 Location: South Wales , Nr. Abergavenny
|
Posted: Wed Aug 05, 2020 4:18 pm Post subject: |
|
|
hindsight wrote: |
Hi Ralph - out of sheer laziness on my part did you also figure out a supplier for the the grommets protecting the fairing where the bolts fit?
I've just measured it to be about 15mm ID, 20mm OD and 2.5mm groove width, and will go looking for a supplier in due course, but I suspect you may have already done so!
Thanks,
Mike |
not near my garage today so cant verify yr dims. Is 20mm the hole in seat unit diameter or the OD of the grommet? A quick Google has got me to item G10-R200-24-150 from the following page (If its 20mm seat hole) https://www.grommets.co.uk/products/grommets/open-rubber-grommets/ Need to look further. _________________ Not as many bikes as I would like and already too many to keep up with! |
|
Back to top |
|
|
welshlamb
Joined: 09 Mar 2011 Posts: 592 Location: South Wales , Nr. Abergavenny
|
Posted: Wed Aug 05, 2020 4:20 pm Post subject: |
|
|
2bims wrote: |
Lovlely WelshLamb......Torn now though....decisions decisions....do I hold back from the black anodising and stay shiney?.....Love my Shiney...and its not like my bike is stock...far from it.....hhmmmmmmmmmm.......Shiney...no....Black...no....no......,,,,,Or shite...just flipping a coin.....shite.....came up tails for Black.....Best of 3....shite.....came up tails again......Best of five.....shite...tails friggin again.....its jinxed......me flipping the coin 3 times means I must want SHINEY none anodised please.......Decision made...FInal.... |
One pair 'au naturel' reserved for you then! _________________ Not as many bikes as I would like and already too many to keep up with! |
|
Back to top |
|
|
2bims
Joined: 03 Apr 2010 Posts: 7289
|
Posted: Wed Aug 05, 2020 5:11 pm Post subject: |
|
|
welshlamb wrote: |
2bims wrote: |
Lovlely WelshLamb......Torn now though....decisions decisions....do I hold back from the black anodising and stay shiney?.....Love my Shiney...and its not like my bike is stock...far from it.....hhmmmmmmmmmm.......Shiney...no....Black...no....no......,,,,,Or shite...just flipping a coin.....shite.....came up tails for Black.....Best of 3....shite.....came up tails again......Best of five.....shite...tails friggin again.....its jinxed......me flipping the coin 3 times means I must want SHINEY none anodised please.......Decision made...FInal.... |
One pair 'au naturel' reserved for you then! |
Cheers Lammie......au naturel better than nylon/plastic twist like cheese stock original Au naturel.... |
|
Back to top |
|
|
brian
Joined: 22 Aug 2011 Posts: 3769 Location: Australia
|
Posted: Fri Aug 07, 2020 4:58 am Post subject: |
|
|
2bims wrote: |
Lovlely WelshLamb......Torn now though....decisions decisions....do I hold back from the black anodising and stay shiney?.....Love my Shiney...and its not like my bike is stock...far from it.....hhmmmmmmmmmm.......Shiney...no....Black...no....no......,,,,,Or shite...just flipping a coin.....shite.....came up tails for Black.....Best of 3....shite.....came up tails again......Best of five.....shite...tails friggin again.....its jinxed......me flipping the coin 3 times means I must want SHINEY none anodised please.......Decision made...FInal.... |
You could always go gold _________________ '99 DB4 #104, '96 SB6 #1165, '94 DB2 J #652, '99 DB4 #088, '08 VTX1800, '93 ZXR750R M1, '95 ZXR750, '95 ZXR750 Race Bike, '94 CBR400rr NC29 Race Bike, '94 CB250, '49 BSA C10 250, '61 BSA A10 650, '89 ZXR750, '91 Ducati 851 |
|
Back to top |
|
|
brian
Joined: 22 Aug 2011 Posts: 3769 Location: Australia
|
Posted: Fri Aug 07, 2020 5:02 am Post subject: |
|
|
brian wrote: |
2bims wrote: |
Lovlely WelshLamb......Torn now though....decisions decisions....do I hold back from the black anodising and stay shiney?.....Love my Shiney...and its not like my bike is stock...far from it.....hhmmmmmmmmmm.......Shiney...no....Black...no....no......,,,,,Or shite...just flipping a coin.....shite.....came up tails for Black.....Best of 3....shite.....came up tails again......Best of five.....shite...tails friggin again.....its jinxed......me flipping the coin 3 times means I must want SHINEY none anodised please.......Decision made...FInal.... |
You could always go gold |
You didn't seem to like the idea of shiney shiney when I did this
_________________ '99 DB4 #104, '96 SB6 #1165, '94 DB2 J #652, '99 DB4 #088, '08 VTX1800, '93 ZXR750R M1, '95 ZXR750, '95 ZXR750 Race Bike, '94 CBR400rr NC29 Race Bike, '94 CB250, '49 BSA C10 250, '61 BSA A10 650, '89 ZXR750, '91 Ducati 851 |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
The Bimota Forum has no official connection to Bimota S.p.A.. We just ride or are interested in their motorcycles and support the brand. All trademarks are acknowledged
|