Bimota Forum

[Falcolion]

I am at the final assembly stage of my YB11 after a complete restoration/refreshening.

Carbs rebuilt and stage 1 Dynojet kit is installed

Forks rebuilt by using 2" seals but still will get OEM replacements Evillchicken is selling

Fully refurbished cooling system: new (used) radiator cause original was leaking and full of crud. All new metal piping and new main hose, new thermostat, new water pump.

Bodywork fixed (spider cracks), repainted and all mounting holes got carbon fiber backing to strengthen plastic and prevent spider cracks.

When I bought the bike the belly pan had been repaired by someone with 2 left hands. There were too many bolts and bolt holes. When repairing and repainting, I asked my bodyman to close all those extra holes. Unfortunately, I think, I asked to close one too many holes.

Hence is my post and request for a favor.

I would be highly appreciative if someone can snap a few pictures right from the bottom of the belly pan by the rear wheel. Basically to position the camera under the belly pan by the rear wheel. This way I would be able to see all the screws on the bottom.

Also another picture would be helpful if one can position a camera by the rear wheel on the left side right over the bottom of the belly pan looking inside of the belly pan and across to the right side. There are 2 brackets there. One black right in the middle and another one on the right side held by a screw that hold the bottom of the shock. I want to see how they are setup

I hope I have expressed myself clearly enough.

If pictures cannot be posted on the forum then I would appreciate if you can email them to me at vladpmisc@optonline.net

Thank you in advance
_________________
2016 Suzuki GSXR750 TRACK BIKE
2010 Husaberg FE390
2008 BMW HP2 Sport
2006 Bimota SB8K Santamonica
2005 Benelli Tornado Tre
2004 Moto Guzzi V11 Coppa Italia
2003 Aprilia SL Falco 10000R
1997 Bimota YB11 Superleggera

[Falcolion]

31 view and no pics.

Can't believe that no one can snap a few pics.

Don't be shy. Help me out

Thanks in advance
_________________
2016 Suzuki GSXR750 TRACK BIKE
2010 Husaberg FE390
2008 BMW HP2 Sport
2006 Bimota SB8K Santamonica
2005 Benelli Tornado Tre
2004 Moto Guzzi V11 Coppa Italia
2003 Aprilia SL Falco 10000R
1997 Bimota YB11 Superleggera

[fish]

Bit hard when im 5000 km and 5 weeks away from my bikes at a time working
_________________
DB1-DB2SR-DB2EF-DB3MANTRA-DB4 YB6-yb7_yb10-2xyb11-SB5,2xSB6-MILLE MIKEHAILWOOD 1000-HARRIS MAGMAN2-TRIUMPH T140-RG500x2-KAWA Z900-SUZUKI 1100KATANA-SUZUKI GSX1100-DUCATI 900SS- 750 sport ducati DUCATI F1 750- 900 boldor 1996 triumph trophy 1200

[Falcolion]

[2bims]

TAV 32/A on here helps somewhat.....and the following page gives you the dimensions of the bolts and wellnuts etc etc...rubber grommets to fit and bushes to fit inside....

http://www.bimota-parts.de/images/PDF/yb11.pdf

[Falcolion]

I have that. Unfortunately there is no diagram that shows rear of the bellypan.

That's why I was asking for actual pics
_________________
2016 Suzuki GSXR750 TRACK BIKE
2010 Husaberg FE390
2008 BMW HP2 Sport
2006 Bimota SB8K Santamonica
2005 Benelli Tornado Tre
2004 Moto Guzzi V11 Coppa Italia
2003 Aprilia SL Falco 10000R
1997 Bimota YB11 Superleggera

[vort28]

Falcolion.

I have a few pictures but unsure with on-line hosting service to use with photobucket demanding money for 3rd party hosting.!!"

PM me your email and I will send whilst I work it out.

[who]

I've started using Imgur.... So far so good

[Falcolion]

Vort sent me pics and it was of great help

Thank you very much
_________________
2016 Suzuki GSXR750 TRACK BIKE
2010 Husaberg FE390
2008 BMW HP2 Sport
2006 Bimota SB8K Santamonica
2005 Benelli Tornado Tre
2004 Moto Guzzi V11 Coppa Italia
2003 Aprilia SL Falco 10000R
1997 Bimota YB11 Superleggera

[2bims]

Pictures on here could also help...this seller has YB11 belly pan pieces...mid panel and nose cones for sale....with clearish piccies of the holes/joins

https://www.ebay.co.uk/sch/135laura/m.html?ssPageName=STRK%3AMEFSXS%3AMESOI&_trksid=p2053788.m1543.l2654

[2bims]

All of his Bimota stuff is here....and all YB11 panels photo'd both sides showing location of fixing holes

https://www.ebay.co.uk/sch/m.html?_ssn=ztkgmbh&ssPageName=STRK%3AMEFSXS%3AMESOI&_from=R40&_sacat=0&_nkw=bimota&rt=nc

[Falcolion]

Thank you vort and 2bimc. Your pictures really helped
_________________
2016 Suzuki GSXR750 TRACK BIKE
2010 Husaberg FE390
2008 BMW HP2 Sport
2006 Bimota SB8K Santamonica
2005 Benelli Tornado Tre
2004 Moto Guzzi V11 Coppa Italia
2003 Aprilia SL Falco 10000R
1997 Bimota YB11 Superleggera